| POWERJET 2 | Temp. neve/snow -6/-12° Temp. aria/air -2°/-16° U. Rel. Aria/Air: 60% - 90% |
PowerJet 2 is the colder companion to PowerJet 1. This solid wax shares many of the same performance characteristics of HP05. Easy to apply, it can be ironed or corked in. If the race morning temperature is very cold, but you expect it to warm up, we recommend corking in a layer of PowerJet 2 over a warmer wax to get you through those first few cold kilometers.
This products in form of dices may be applied over a hot made base, either to boots the acceleration or to correct a wrong skiwaxing. Apply the dice by rubbing it into the ski bottom and subsequently either iron or cork them.
The iron application ensures a long lasting performance, while the cork application is fast and may be easily made on ski slopes or tracks.
APPLICATION: Pure perfluorine alkanes are our most expensive products and those giving the best performance. They have no affinity with Polyethylene ski-bases and do not last long if applied directly. To make them long lasting and efficient, it is necessary to make a base layer by applying hot the ski wax of the F31 or F15 line, to be chosen according to use conditions (e.g. F31 or F15 Orange are an excellent base for Fluor, while F31 or F15 Violet or Blue good base for HP05). RECOMMENDATIONS CONCERNING FLUORINE APPLICATION: When ironing FLUOR on the ski-base, do not exceed 140°C, make sure the room is well ventilated and do not smoke. Wear a respirator when waxing for a long period of time. Conditions of use: Snow temperature: 23°... 30° F Relative humidity RH%: 50%...100%
