POWERJET 4 | Temp. neve/snow -4/-13° Temp. aria/air 0°/-17° U. Rel. Aria/Air: 30% - 100% |
Carbon Speed Enhancer.
Rub onto dry, base-prepped skis then cork and brush. Use as top layer or as an under layer for fluorocarbon. Can be used in combinations with SOLDA HPO5 or Fluor in spray or powder. PowerJet Carbon 4 has a wide range of use: 8 to 25 F (-13 to -4C), Humidity: 30% - 100%, making it an ideal option in almost all snow and humidity conditions.
This products in form of dices may be applied over a hot made base, either to boots the acceleration or to correct a wrong skiwaxing. Apply the dice by rubbing it into the ski bottom and subsequently either iron or cork them.
The iron application ensures a long lasting performance, while the cork application is fast and may be easily made on ski slopes or tracks.
APPLICATION: Pure perfluorine alkanes are our most expensive products and those giving the best performance. They have no affinity with Polyethylene ski-bases and do not last long if applied directly. To make them long lasting and efficient, it is necessary to make a base layer by applying hot the ski wax of the F31 or F15 line, to be chosen according to use conditions (e.g. F31 or F15 Orange are an excellent base for Fluor, while F31 or F15 Violet or Blue good base for HP05). RECOMMENDATIONS CONCERNING FLUORINE APPLICATION: When ironing FLUOR on the ski-base, do not exceed 140°C, make sure the room is well ventilated and do not smoke. Wear a respirator when waxing for a long period of time. Conditions of use: Snow temperature: 23°... 30° F Relative humidity RH%: 50%...100%