Product 9 of 9
Previous  Back to cathegory  Next

Briko / Maplus Arctic Base Powder Additive -10°...-30°C, 100 g
[BMW1000]

14.90€

Product Quantity

Reviews

Arctic Base Powder Additive is a hard powder paraffin for training use and competition. Specially designed for abrasive snow conditions and artificial snow when temperature -30°C...-10°C. Racing use when air humidity < 30%. In the case of old icy and very abrasive snow (spring snow and glacier snow) this paraffin can be used as a top layer over the fluorocarbon waxes FP4 to increase their durability. The final result will be a lower hydrophobia. It is also used as universal hardener to protect polyethylene ski base near steel edges. Applied by the hot application method with a waxing iron.

 

APPLICATION PROCEDURE
Place the powder paraffin evenly on all the ski base;
Fix the paraffin each 20 cm. with the waxing iron at a suggested temperature of       150°C. and spread it immediately with a regular forward movement. Repeat the same procedure on all the ski base, then carry out a final passage from the tip to the tail (nearly 3 cm. per second);
Wait at least 15 minutes for the ski wax to harden and the ski base to cool down;
Remove the was in excess with a sharpen plexy scraper doing little pressure;
Free the ski side and edges side from hardened paraffin with the plexy scraper;
Brush the ski base with a soft steel or a soft brass manual brush;
Brush the ski base with a manual or roto hard horsehair brush;
Polish the ski base with a manual or roto soft nylon brush.

APPLICATION PROCEDURE

  1. Place the powder paraffin evenly on all the ski base;
  2. Fix the paraffin each 20 cm. with the waxing iron at a suggested temperature of 150°C. and spread it immediately with a regular forward movement. Repeat the same procedure on all the ski base, then carry out a final passage from the tip to the tail (nearly 3 cm. per second);
  3. Wait at least 15 minutes for the ski wax to harden and the ski base to cool down;
  4. Remove the was in excess with a sharp plexy scraper;
  5. Clean the ski sides and edges from hardened paraffin by the plexy scraper;
  6. Brush the ski base with a soft steel or a soft brass manual brush;
  7. Brush the ski base with a manual or roto hard horsehair brush;
  8. Polish the ski base with a manual or roto soft nylon brush.

 

Product Quantity Reviews

We Also Recommend
Fluor free racing wax Maplus GM Base Cold Solid -22°...-8°C
Fluor free racing wax Maplus GM Base Cold Solid -22°...-8°C
40.00€
Buy Now
Fluor free racing wax Maplus GM Base Hot Solid -3°...+0°C
Fluor free racing wax Maplus GM Base Hot Solid -3°...+0°C
40.00€
Buy Now
Fluor free racing wax Maplus GM Base Med Solid -9°...-2°C
Fluor free racing wax Maplus GM Base Med Solid -9°...-2°C
40.00€
Buy Now