Fluorocarbon powder wax for racing. Designed for snow temperature range from -3°C to -0°C, for transformed, in transformation crystal and abrasive artificial snow. Air humidity > 50%. Recommended hot application with waxing iron at 160°C.
Iron temperature: 160°C
Air humidity: 50%...100%
APPLICATION PROCEDURE
Place the powder wax evenly on the ski base;
Spread the wax on the ski base by rubbing and pressing with the manual cork (useful the brush cork/nylon MT0111);
Melt the wax by passing the waxing iron from the tip to the tail at a suggested temperature of 160°C.;
Remove the melted wax with a rigid brush (useful the brush cork/nylon MT0111) then melt it again by passing the waxing iron from the tip to the tail once again at the same temperature above mentioned;
Then, roll the ski base surface with a cork roller or polyester roller at a drill speed between 1000 and 1500 rpm, according to the pressure applied;
Wait at least 15 minutes for the ski wax to harden and the ski base to cool down;
Brush the ski base with a manual or a roto hard horsehair brush;
Brush and polish the ski base with a manual or a roto soft horsehair or nylon brush;
Polish the ski base with a 10 mm. merino wool roller.
APPLICATION PROCEDURE
- Place the powder wax evenly on the ski base;
- Spread the wax on the ski base by rubbing and pressing with the manual cork (useful the brush cork/nylon MT0111);
- Melt the wax by passing the waxing iron from the tip to the tail at a suggested temperature of 160°C.;
- Remove the melted wax with a rigid brush (useful the brush cork/nylon MT0111) then melt it again by passing the waxing iron from the tip to the tail once again at the same temperature above mentioned;
- Then, roll the ski base surface with a cork roller or polyester roller at a drill speed between 1000 and 1500 rpm, according to the pressure applied;
- Wait at least 15 minutes for the ski wax to harden and the ski base to cool down;
- Brush the ski base with a manual or a roto hard horsehair brush;
- Brush and polish the ski base with a manual or a roto soft horsehair or nylon brush;Polish the ski base with a 10 mm. merino wool roller.
