Product 2 of 25
Previous  Back to cathegory  Next

Rex SLC-Gel -5°C...-15°C, 30ml
[472]

75.00€

Product Quantity

Reviews

SLC Gel was designed for dry powder snow down to -15°C / 5°F. SLC Gel is used to provide better glide on top of other glide waxes, on top of other fluor coatings or alone.

Spread SLC evenly onto your skis with your finger and rub it with your palm until it dries. Brush with hard nylon brush. One treatment lasts for 5-10 km, if necessary use several treatments. It is very important that you shake the SLC Gel before use. For maximum performance, spread SLC Gel on the base with your finger and rub it with your palm until it dries, then brush with a stiff nylon brush. Do not use an iron. A single layer should last 5-10 km depending on the abrasiveness of the snow. Use several layers for icy conditions, abrasion resistance is better if the first layer is applied on to a warm ski base.


Speed tip: For cold snow below -5°C / 23°F, with a clean ski, apply several layers of Rex Blue #423, allowing them to cool; then scrape and brush between layers. Apply 1-2 layers of Olympico Green #418 or Olympico Blue #417, one layer of TK-72 # 483 fluor block, then top it off with a coat of SLC Gel.

Product Quantity Reviews