Product 28 of 37
Previous  Retour à la cathégory  Next

Fluoro poudre Briko-Maplus FP Marathon Hot, neige -3°...+0°C, 30g
[BMW0602]

99.95€

Nombre de produits

Avis des clients

Fluorocarbon powder wax for racing. Designed for snow temperature range from -3°C to -0°C, for transformed, in transformation crystal and abrasive artificial snow. Air humidity > 50%. Recommended hot application with waxing iron at 160°C.

Iron temperature: 160°C
Air humidity: 50%...100%

 

APPLICATION PROCEDURE
Place the powder wax evenly on the ski base;
Spread the wax on the ski base by rubbing and pressing with the manual cork (useful the brush cork/nylon MT0111);
Melt the wax by passing the waxing iron from the tip to the tail at a suggested temperature of 160°C.;
Remove the melted wax with a rigid brush (useful the brush cork/nylon MT0111) then melt it again by passing the waxing iron from the tip to the tail once again at the same temperature above mentioned;
Then, roll the ski base surface with a cork roller or polyester roller at a drill speed between 1000 and 1500 rpm, according to the pressure applied;
Wait at least 15 minutes for the ski wax to harden and the ski base to cool down;
Brush the ski base with a manual or a roto hard horsehair brush;
Brush and polish the ski base with a manual or a roto soft horsehair or nylon brush;
Polish the ski base with a 10 mm. merino wool roller.

APPLICATION PROCEDURE

  1. Place the powder wax evenly on the ski base;
  2. Spread the wax on the ski base by rubbing and pressing with the manual cork (useful the brush cork/nylon MT0111);
  3. Melt the wax by passing the waxing iron from the tip to the tail at a suggested temperature of 160°C.;
  4. Remove the melted wax with a rigid brush (useful the brush cork/nylon MT0111) then melt it again by passing the waxing iron from the tip to the tail once again at the same temperature above mentioned;
  5. Then, roll the ski base surface with a cork roller or polyester roller at a drill speed between 1000 and 1500 rpm, according to the pressure applied;
  6. Wait at least 15 minutes for the ski wax to harden and the ski base to cool down;
  7. Brush the ski base with a manual or a roto hard horsehair brush;
  8. Brush and polish the ski base with a manual or a roto soft horsehair or nylon brush;Polish the ski base with a 10 mm. merino wool roller.
Nombre de produits Avis des clients

Nous recommandons également
Maplus Cork/Nylon Brush
Maplus Cork/Nylon Brush
9.90€
Acheter maintenant
Briko / Maplus Brosse rotative en liege, 10cm
Briko / Maplus Brosse rotative en liege, 10cm
29.90€
Acheter maintenant